Yamaha Triples
Search Forums | Statistics | User Listing Forums | Calendar | Albums | Chat | Skins | Language
You are logged in as a guest. ( logon | register )


Finished custom intake
Moderators: Moderators

View previous thread :: View next thread
   Modifications -> CarburetorsMessage format
 
SnazzyShane
Posted 2008-01-27 7:32 PM (#50519)
Subject: Finished custom intake


Ive been in the process of rebuilding my triple for the past eight months now. Somehow i lost the original airbox when i took it off several months ago, so i decided to build a custom intake. I settled on a pretty simple PVC and K&N setup. Here it is...hope i got the pictures to work

http://img.photobucket.com/albums/v287/snazzyshane/intake3.jpg

All in all cost about 45 bucks. The couplings on the end are some generic plumbers couplings you can pick up at home depot for two bucks each. I was originally going to have the filter pointing to the side, but it interfered with the side covers. I have plenty of room sans airbox if i need to go to a bigger filter. Do yall think i will have any airflow problems with this size filter?

::edit:: i forgot to mention i plan on drilling a hole for a tee to run the crankcase breather to.

Edited by SnazzyShane 2008-01-27 7:34 PM
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

 

Running MegaBBS ASP Forum Software
© 2002-2017 PD9 Software
(Delete all cookies set by this site)